盐邦论坛

标题: 预制检查井钢模具产品型号，制作工艺及特点介绍-建信 [打印本页]

作者: 建信模具 时间: 2021-12-11 13:39
标题: 预制检查井钢模具产品型号，制作工艺及特点介绍-建信
从检查井模具使用材质上分析，按照排水井的型号大小，钢板选择的厚度是不同，污水检查井模具钢

模板从选材来说，选用工程聚丙烯pp为原料，这种原料能够降低成本，同时对于实际使用不易破损，

有韧性，同时回收利用，在生产过程中。

From the analysis of the material used for the inspection well mold, according to the

model and size of the drainage well, the thickness of the steel plate is different. From

the material selection of the sewage inspection well mold steel template, engineering

polypropylene PP is selected as the raw material, which can reduce the cost. At the same

time, it is not easy to be damaged in actual use, has toughness, and can be recycled at

the same time.

预制模具由厚钢板通过切割、弯曲、焊接、研磨等工艺制成，功能和性能相同，全部用于水利工程，

排放污水，防止优质水源污染，保护环境。检查井钢模具经过卷曲，裁切，造型，加固，焊接，拼装

，打磨等多道手续制作的。
"The prefabricated mold is made of thick steel plate through cutting, bending, welding,

grinding and other processes. It has the same function and performance. It is all used in

hydraulic engineering to discharge sewage, prevent high-quality water pollution and

protect the environment. The inspection well steel mould is made through many procedures,

such as crimping, cutting, modeling, reinforcement, welding, assembly, grinding and so

on."

检查井钢模具具有良好的抗压能力,可有效防止地面塌陷而出现的事故,而且施工周期短,检查井钢模具

拥有了设备优势和规模优势,在技术上,采用一次成型注塑工艺来生产检查井。检查井钢模具构造：内

模、外模、连接孔、上盖模具。检查井模具具有---的抗腐蚀的性能，造价也普遍的低。检查井模具

是简便的降低生活污水当中的污染物的工具。
The inspection well steel mold has good compressive capacity, which can effectively

prevent accidents caused by ground collapse, and the construction cycle is short. The

inspection well steel mold has the advantages of equipment and scale. Technically, the

inspection well is produced by one-time molding and injection molding process. Inspection

well steel mold structure: inner mold, outer mold, connecting hole and upper cover mold.

The inspection well mold has excellent corrosion resistance and low cost. Inspection well

mold is a simple tool to reduce pollutants in domestic sewage.

欢迎光临盐邦论坛 (http://www.ybltw.com/)