隔离墩模具用途 隔离墩模具结构图 水泥模具钢模具定制

建信模具

隔离墩模具用途隔离墩模具结构图是以标准图集形式出现的，在对隔离墩钢模具的生产下

，不同样式以及不同尺寸的模具一一开发出来。因为隔离墩的使用不单单是广场、公路等

，高速公路对于隔离墩预制件的需求量是非常大的。隔离墩模具用途隔离墩模具结构图的

标准根据地区性差异而言，隔离墩钢模具模板的大小是不同的，各个地区使用的隔离墩预

制件根据具体工程以及施工图纸进行生产。在隔离墩模具作业中，图纸以及具体要求是厂

家生产的依据。隔离墩钢模具模板是不可多得的一种钢模具，因为有了隔离墩钢模板，在

隔离墩预制件的生产中才会如此的便利以及速度，而且对于行车安全，行人安全都是非常

有利的。一般小型隔离墩预制件的规格为50*15*45厘米，而大型隔离墩预制件的长度为2米

，高度一般在80-100厘米之间，采用翻转架生产。The structural drawing of the die

for the isolation pier is in the form of standard drawing set. Under the

production of the die for the isolation pier, the dies of different styles and

sizes are developed one by one. Because the use of isolation pier is not only

the square, highway and so on, highway for the isolation pier prefabricated

demand is very large. The Standard of the structural drawing of the die for the

isolation pier is different according to the regional difference, the size of

the steel die for the isolation pier is different, pRECAST isolators used in

each area are manufactured according to specific engineering and construction

drawings. In the isolation block mold operation, the drawing as well as the

specific request is the factory production basis. The isolation pier steel mold

plate is a rare steel mold, because with the isolation pier steel mold plate,

in the isolation pier prefabricated parts production will be so convenient and

fast, and for safe driving, pedestrian safety is a very good thing. The size of

the preform of the general small isolated pier is 50 * 15 * 45 cm, while the

length of the large isolated pier preform is 2 m, the height is generally 80-

100 cm, using the production of the turnover frame.