桥梁防撞护栏模具 防撞墙模具的详细说明 路沿石模具

建信模具

桥梁防撞护栏模具根据施工单位一般都会总结出不同样式混凝土防撞护栏所需要的模板在生产上存在差异，因为有些防撞护栏内侧模板与外侧模板的高度不统一，所以为了具体解释防撞护栏模具，需要对常见的几种类型作出详细的说明：
Bridge crash barrier mold according to the construction unit will generally sum up different styles of concrete crash barrier need template in the production of differences, because some crash barrier inside template and outside template height is not uniform, therefore, in order to explain the anti-collision guardrail mold, we need to make a detailed description of the common types:
1、防撞护栏模具生产量以及使用量较多的为高度统一，长度1米的类型，因为这种模板是经过长时间实际工程验证的，在模板应用以及实际操作上都是便利的，尤其是长度1米的设置，工人完全可以手工搬运，不需要使用其他机械，这样就可以保证在任何场地都可以实现混凝土防撞护栏的生产了。The production and usage of the mould for the anti-collision guardrail are of the highly uniform type with a length of 1 meter, as this type of mould has been verified by practical engineering over a long period of time, and is convenient in the application of the mould and in the practical operation, in particular, the length of the 1-meter set-up, workers can completely manual handling, do not need to use other machinery, so that you can ensure that any site can be concrete anti-collision barrier production.

2、防撞护栏模板的另一种类型为主要的两块模板高度不一样，因为防撞护栏是挨着公路现浇的，所以一侧模板会在公路上面，而另一侧则在公路两侧的路基上，所以就造成了高度差的不同，在模板的制作上就体现了高度的不同了。这种模板的应用比较少，但是在山东地区使用量较大。不同的防撞护栏生产需要不同的模板，所以每套模板的规格样式大体一样，但是细分到具体的尺寸以及外形上就会存在差异了，以上就是对常用防撞护栏钢模具几种类型的介绍了
The other type of crash barrier formwork is the main two formwork height is different, because the crash barrier is cast next to the highway, so one side of the formwork will be on the highway, and the other side will be on the roadbed on both sides of the highway, so caused the difference in height difference, in the production of the template reflects the height of the different. The application of this kind of template is less, but the quantity is bigger in Shandong area. Different crash barrier production needs different template, so each template’s specification style is generally the same, but subdivides to the concrete size and the contour will have the difference, the above is to the common anti-collision guardrail steel mold several types of introduction
建信模具生产道路防撞护栏模具，防撞墙模具，现浇防撞护栏模具，路沿石模具，路缘石塑料模具，混凝土空心砖模具，六棱块护坡模具，路边石塑料模具，沟盖板塑料模具，连锁护坡模具，遮板模具，检查井模具，声屏障模具，步道板模具，六角护坡模具，六棱块护坡模具等。


Jianxin Mould produces road crash barrier mould, crash barrier mould, cast-in-place crash barrier mould, Kerb Stone Mould, Kerb Stone Plastic Mould, concrete hollow brick mould, six-arris block slope mould, Kerb Stone plastic mould, trench cover plastic mould, chain revetment mould, shutter mould, inspection well mould, Sound Barrier Mould, trail board mould, hexagonal slope mould, hexagonal Slope Mould, etc. .