混凝土化粪池模具 化粪池钢模具的注意事项-建信厂家

建信模具

混凝土化粪池模具用于制作像独居户、学校、旅游景点等地方的化粪池，要想制作一个质量合格用使

用时间长久的混凝土化粪池模具需要注意以下几点1.根据客户需求提供的设计师图纸制作出相对应尺

寸的模具，然后使用模具制做混凝土化粪池，模具有塑料模具有钢模具，很多工程喜欢选取钢模具，

因为钢模具的使用时间长久、承受力大坚固，建议使用钢板因为比起普通钢板钢板使用的时间长久，

2.施工时为了让混凝土化粪池模具制作的化粪池外表美观度增加，在注入混凝土震动完之后需要施工

人员用刮板把它的表面抹平，然后建议涂抹上油漆，这样让化粪池的使用时间延长不会损坏，起到一

个保护化粪池的作用，3.等混凝土完全凝固后，脱完模需要对模具进行及时的清洗，如果清水清洗不

干净的话，要及时使用稀释后的草酸对模具进行清洗，然后用刷子把表面残留的混凝土残留物刷干净

，用专门擦模具的抹布把模具表面的水分擦干净，避免出现生锈的现象，这样即方便模具下次使用，

又能使模具的使用寿命延长。

The concrete septic tank mold is used to make septic tanks in places such as single

households, schools and tourist attractions. In order to make a concrete septic tank mold

with qualified quality and long service life, we need to pay attention to the following

points 1 According to the designer's drawings provided by the customer's needs, the molds

with corresponding dimensions are made, and then the molds are used to make the concrete

septic tank. The molds include plastic molds and steel molds. Many projects like to

choose steel molds because the steel molds have long service time and strong bearing

capacity. It is recommended to use steel plates because they are used for a long time

compared with ordinary steel plates. 2 During construction, in order to increase the

appearance of the septic tank made of the concrete septic tank mold, after the concrete

is injected and vibrated, the construction personnel need to smooth its surface with a

scraper, and then it is recommended to apply paint, so as to prolong the service time of

the septic tank without damage and protect the septic tank. 3 After the concrete is

completely solidified, the mold needs to be cleaned in time after removing the mold. If

the clean water is not clean, the mold should be cleaned with diluted oxalic acid in

time, then the residual concrete residue on the surface should be brushed with a brush,

and the water on the mold surface should be wiped with a special rag to avoid rust, This

not only facilitates the next use of the die, but also prolongs the service life of the

die.