高速标志桩钢模具,标志桩塑料模具-建信模具

[复制链接]

该用户从未签到

30

主题

30

帖子

118

积分

注册会员

Rank: 2

积分
118
分享到:
发表于 2021-12-15 14:55:39 | 显示全部楼层 |阅读模式
标志桩模具分为标志桩钢模具和标志桩塑料模具,两者在材料上的不同也决定了两者的价格不同。从脱模速度来说,标志桩钢模具的速度要远远快于塑料模具,从这一点上,水泥制品的产量就会提高,尤其是在夏天温度较高的季节,水泥桩的产量就会相对冬天生产提高3-5倍,如果是非常紧急的工程采用标志桩钢模具生产就不言而喻了。由于钢模具漏水效果比较好,在搅拌混凝土的时候也不需要放太多的水,这样一来,在很大程度上就提高了水泥件的干燥程度,成型速度快了,生产量就会提高很多。所以客户在选择的时候要从多方面考虑,不能只注重价格因素,选择适合自己工程的模具产品才重要。

The mark pile mould is divided into mark pile steel mould and mark pile plastic mould. The difference in materials also determines the different prices of the two. In terms of demoulding speed, the speed of steel mold for sign pile is much faster than that of plastic mold. From this point, the output of cement products will be increased, especially in the season with high temperature in summer, the output of cement pile will be 3-5 times higher than that in winter. It is self-evident that steel mold for sign pile is used for very urgent projects. Due to the good water leakage effect of the steel mold, there is no need to put too much water when mixing the concrete. In this way, the drying degree of the cement parts is improved to a great extent, the molding speed is fast, and the production will be improved a lot. Therefore, customers should consider from many aspects when choosing, not only pay attention to price factors, but also choose mold products suitable for their own projects.


回复

使用道具 举报

使用高级回帖 (可批量传图、插入视频等)快速回复

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则   Ctrl + Enter 快速发布  

发帖时请遵守我国法律,网站会将有关你发帖内容、时间以及发帖IP地址等记录保留,只要接到合法请求,即会将信息提供给有关政府机构。
快速回复 返回顶部 返回列表