防撞墙钢模板 混凝土防撞墙模具标准型号 科天制造

[复制链接]

该用户从未签到

30

主题

30

帖子

118

积分

注册会员

Rank: 2

积分
118
分享到:
发表于 2021-12-21 15:50:20 | 显示全部楼层 |阅读模式 IP:浙江绍兴
现浇生产的混凝土防撞墙是由防撞墙钢模具制作的,这种钢模具没有所谓的标准型号,防撞墙

钢模具是由至少3个厚的盖板制作,而且筋板的厚度不低于5个厚,整套的质量至少1米一段。

高速公路常用的防撞墙钢模具基本上又三种,防撞隔离墩模具、防撞墙模具、新泽西护栏模具

,这几种虽说名字叫法不一样,但基本上都是一类钢模具,在公路上的隔断和保护作用。保定

科天模具厂常年来制作防撞墙模具,无论哪种形式的钢模具,只要能够提供大样图的图纸就可

以定制生产的。
The cast-in-situ concrete anti-collision wall is made of anti-collision wall steel

mold. This steel mold has no so-called standard model. The anti-collision wall

steel mold is made of at least 3 thick cover plates, and the thickness of the rib

plate is not less than 5 thick. The quality of the whole set is at least 1 meter.

There are basically three kinds of steel molds for anti-collision wall commonly

used in expressway, including anti-collision isolation pier mold, anti-collision

wall mold and New Jersey guardrail mold. Although their names are different, they

are basically a kind of steel mold, which plays a role in isolation and protection

on the highway. Baoding Jianxin mould factory has been making anti-collision wall

molds all year round. No matter what form of steel molds, they can be customized

as long as they can provide detailed drawings.


回复

使用道具 举报

使用高级回帖 (可批量传图、插入视频等)快速回复

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则   Ctrl + Enter 快速发布  

发帖时请遵守我国法律,网站会将有关你发帖内容、时间以及发帖IP地址等记录保留,只要接到合法请求,即会将信息提供给有关政府机构。
快速回复 返回顶部 返回列表